there's a place on the drivers side of the intercooler you need to take the grill off, not a big job just twist the plastic clips with a screw driver and maybe take the boonet latch off and 2 othe bolts that holds the intercooler in place and it's out. Thats where mine is anyway cheers
i plumb mine in were the turbo outlet pipe is going to the intercooler there is a square block on the top witch a 10mm bolt holds a bracket for a vaccum line i taped a hole through the block on a small angle into the pipe . and screwed a 90 degree brass fitting witch i connected my boost line onto no problems at all just used loctite 577 high pressure pipe sealant to seal the thread