got my mickey t's 285/75/16 33's

[jockboy]

got them eventually after all the research checking to see they would scrub with OME 2 inch suspension lift but no. dricing on bitchume 2 inch space on front at the mudflap, so the inner guard of the arch just about an inch cut away and plenty of room not even rub on full flex.

 

[mgermasi]

Nice, they look awesome!
Can i Ask what distance do you have from wheel centre to top of wheel arch?
I need to replace the tyres in the next 2 months and I would like to make sure they will fit.
Thanks
Max

 

[NFURY8]

the correct way to messure the lift is from the lower lip of the rim to the bottom of the wheel arch

 

[mgermasi]

If you measure it that way you'll have a different result based on if have a 16 or a 17 inch rim because you are including the radius of the rim into your measurement.
Please see attached (suspension data on page 3)
Cheers Max

 

[mgermasi]

Jockboy were you able to fit them to the standard rims or did you have to put new rims on?

 

[Vigilante]

Looks tough! So you haven't had to add any coil or strut spacers to lift the front end a bit further?

 

[jockboy]

when went to check if they fitted mgermasi the used my own 17inch rim and turned the wheel to see it rubbed, but not a prob. on full lock though while driving it rubs the slightest little bit on the very far inside so just cut it away cannot see a thing its just plastic.so going away again tommorow to moore river here in WA so should be fun get the car wet and muddy in the river rocks good fun.

23 and a bit inches from centre of the rim to top of the arch. tyres/rims i use 285/70/17.
i got the new d40 spain different shape now as my old d40 was more truck like so don't know dimensions.

google the specs of your car all measurements height wheel arch against my car 2013 st d40 spain

hopefully helps in some way