front recovery point for np300

[difflock]

i bought those aftermarket 'road safe' front recovery brackets, the instructions say i use the two factory retaining nuts with the two new bolts for the left hand side. ok simple enough and then use the two nuts with the welded plates which have the wire welded with it as well to feed down the chassis rail... but it fails to mention i have to first remove the plastic front bumper guard with bottom plastic spolier then remove the front chassis cross member piece to access the chassis rail to insert the nut with plate... am i missing something or don't know how to do it as there's no mention of any of this on the 6 dot-point instructions.