Search results

Hey everyone, Would anyone know the part number or be able to send through some pictures of the bracket / battery tray that sits on the passenger side for the models with 2 batteries? I have a zd30 d22 and want to put a second battery in the engine bay, I have a snorkel from a yd25 on it, so...

It is actually running much better now, I think it may have just slowly gotten worse as more of the glow plugs died, so I didn't notice a sudden change, but it feels a lot better now

Replaced the glow plugs yesterday, and this morning it started up perfectly. All the old plugs had chunks missing out of the tips, and definitely were open circuit when I tested then out of the engine, so that was certainly my issue. Thanks everyone for all the suggestions

I'm gonna buy some new glow plugs and replace them, so I'll see if that makes any difference.

Also just checked with another multimeter which reads "1" when it is open circuit. Touching the probes together read 1.3 ohm, but measuring across each of the plugs gave me "1" again, so open circuit

My multimeter only has one auto ranging resistance setting, and touching the probes together it reads 0.2 ohm, and will measue other resistances fine

I've tried testing the glow plugs, just want to make sure I'm doing it right. I disconnected the rail that connects all of the plugs, and am measuring the resistance between each glow plug and a ground point on the block. My multimeter is showing OL on all of the plugs, so are they all dead, or...

sorry, it seems that if I start it, then turn it off and leave it a while then try to start again, it takes a long time to start. If I start it, drive around a little bit, then turn it off and try to start again, it will start up instantly

As in the videos in my first post, the smoke is mostly white with a little bit of black at the end. Once I have started, it will start again almost instantly for the rest of the day, but then starting again the next morning it will take a long time again

Thanks for the quick response I tried pumping the primer, and it went very hard to the point that I couldn't pump it anymore after only 3 pumps. Trying to start after this didn't result in any improvement, was still about 30 sec of cranking before it started. Also, if it is just an air in the...

Hey everyone, I've recently started having a starting issue with my 2002 zd30 d22 It used to start up almost instantly, but now it can sometimes take up to 30 sec of cranking before it starts When it does then start i get a bunch of smoke out the back So far I have checked that I am getting...