Search results

Perth sounds like a shit box place to me....... $150 in QLD for a mod plate, no engineer required or testing what so ever

2" body lift..... Pretty safe to say about a 2" gap don't ya think....!!

I f you change your uca's it gives you more bump stop clearance which allows you to wind the front up to a level 2" lift as standard uca's don't give enough enough clearance between the bump stops for a full 2" lift. You want to try and have at least 10mm between your top bump stops after...

I worked for Youi insurance for 3yr's and that renewal is crazy over priced, rating 1 doesn't mean shit as any 1 even without insurance history can ring an insurer and be givin a rating 1 if they state they have a clean driving history, and nobody no's if they have a good insurer until they have...

Ive got an after market dump on mine and fits with more than enough room, Just get an exhaust shop to do a mandrel bent 3" system with high flow cat (100cell) and no mufflers with a new dump.... should cost 1200 max

Rancho xl9000's are awesome, they are also adjustable

My revs dropped by 500rpm at 100-110km/h, after installing a chip, 3"exhaust and 265/75 tyres.... even tho the revs have dropped I have lost a very small amount of fuel economy..... In my opinion if you put bigger rubber on you will lose economy... at the end of the day it's like 5-10bucks a wk...

With standard uca's you can barely get 2" of lift and with the calmini arms you can barely get 3", i have a 2an2" lift and have wound the front up (ironman T Bars) for an even 2" lift and the cv boots are already touching and I only have about 15-20mm between the bump stops..... I am very happy...

I only lost a small amount of fuel economy and as much as I love the extra power I drive my car pretty mellow, usually change gears around 2-2and a half thou and rarely rev it past 3thou unless I have to. The steinbauer chip s great, really good gains and very safe for the engine and believe it...

No mate, thats not taking that into consideration...... I also have the steinbeauer chip don't forget, I wasn't to worried about losing or gaining fuel economy as I just wanted the extra power which was well worth the $2600 I paid for the exhaust and chip set up

I was getting 700per tank before I did work to my 2011 yd25 after the I fitted 265/75 KM2's steinbeauer chip and 3" exhaust my economy dropped to around 640per tank driving it normally giving it the odd squirt..... well worth it for the power tho

dont get a tub liner they hold water underneath and eventually turn to shit, you just spent the coin on a brand new car so spend the money on a good spray on liner..

http://www.youtube.com/watch?v=QjvzFrCyfMM Here's my exhaust mate, 3", new dump pipe, high flow cat and no mufflers, it's mandrel bent and finishes just before it gets to the spare..... I love the sound and have had shitloads of good comments from random people in the street. The extra power is...

Ive got a 3" on mine (2011 2.5) and wouldn't do it the same way if I had to do it again...... At the end of the day your ute is going to go better no matter which size you choose

Watched it yesterday, bloody awesome movie...

Just get a set of rancho xl9000 in the front and you'll be sweet, I've got a 2" lift and UCA's and if I fully levelled my car out the bump stops would be touching

A piece of marine ply thick enough to support the bikes with hinges at the front and gas struts attached to the lid and the inner sides of your try, then match some marine carpet to the colour of your car...... Mega easy to make, cheap, colour coded and slimline

we were there for a wk at christmas and saw 4-5 dingo's max, we camped on the beach about a km before the maheno, was close to every where and was a great spot.... if you camp in the fenced places you miss out on the view, and make sure you get to the sandy cape, its a great drive

We camped at the Maheno and the drive to the sandy cape was great.......... Hope you had a good trip mate

Yeah mate, 2" body lifts are completely legal in QLD and body lifts have no effect on air bagged cars as the sensors are not where you put the blocks, I got 2011 D22 mod plated with no dramas for $150.... I run 32's on 16/8 rims with a 0 offset with no probs and could easily fit 33's, there is a...