Search results

Thanks for your advice guys. I'm pleased to say that I got going and I made it home. The problem (still not identified or rectified) appears to be caused by extreme cold...we experienced nights of near and below freezing. The next morning it would start and would run at fast idle on the heat...

It's a2005 Z30. No diesel smell, No engine light, Idles smoothly, Starts easily. After resetting and driving yesterday it started and accelerated normally every time. This morning started OK but no throttle response. Resetting ECU did not change it.??? Cheers SOLO

G'day Guys ' I'm out bush and have no throttle response. Yesterday I got it to work by resetting the ECU and it was fine all day, but this morning it would not rerspond again and disconnecting the battery for 1/2 an hour has not fixed it. 1. Any suggestions as to the problem/ solution? 2...

I'm runnung TI patrol alloys with 275/70r16 tyres with no lift. Cheers Solo

I'm running 275/70r16 comfortably with the mudflaps changed and the guards trimmed back. Cheers Solo

Seem to be challenged uploading more than 1 photo at a time? "Hole drilled in connection pipe for airflow sensor"

Some photo's of snorkel install Cheers Solo

Yes, It cover the old hole. You have a little flexibility in positioning! Cheers Solo

G;day guys, Bought a D22 snorkel off E-bay ex Malaysia which turned up today ...9 days after purchase ! Price was $109.99 + $69.99 freight. I ordered an extra rams head for $19.99 combined freight. (you're bound to knock 1 off in the bush). Quality was good....solid LLDPE mouldings, brass...

I've got a pair of fronts off a 2005 D22. Drivers side is good , passenger side has one crack in it. $40.00 plus post the pair. PM me Cheers SOLO

G'day guys, I went looking today to try and find the cause of my engine/exhaust noise. I took the heat shield off and could not find and sign of a leak in the exhaust or turbo. EGR flanges all seemed good. Whilst underneath looking up at the back of the motor I could see some oil staining...

G'day Fellas, I'm interested if anyone has nailed this Noise as I have had the same problem on my 2005 3.0 z30. It sounds like an exhaust rattle or baffle loose in the muffler but is only there around 2000 revs when you back off a little, but is not there under acceleration. Anyone come up...

Thanks for the info guys, I located the resistor in the air duct next to the blower fan. Yes its a bitch to get at. I had to remove the mounting screws on the duct so that I could pull it forward a little to get at the back screw on the resistor. You cant get a phillips head screwdriver square...

The aircon blower on my D22 will only run on speed "4" On "1" "2' & "3" nothing happens. Took the 4 speed switch out and that looks OK inside, cleaned with contact cleaner and tests OK. New fan fitted to the blower canister and blows plenty of air on setting "4" What can be stopping operation...

Air bags or bags of hot air? On another thread, ZORDO who does suspensions for a living says that a 2'' lift does not affect airbag function. I can't see how it would make any difference to airbag deployment. Fitting a bullbar is more likely to interfere with airbag operation! If you can get...

Body Lift - Need help Started the body lift today on my '05 D22 dual cab. The captive nuts under the centre pillar are turning and are not accessible. What is the solution? My plan is to cut the heads off of the bolts from underneath and drive the bolt up into the floorpan to centre the hole...

Navara Suspension G'day Zordo, Got gear from you for my patrol last year. Now I need a 2' lift for my navara dual cab 01/05 navara dual cab D22 DX manual. Trade body on the back with tools. Towbar and bullbar. Require price on rear leafs, front springs and shocks. Its done 225,000 and had a...

Exhaust G'day mate, Jump on Ebay and look up "Exhaust Queen" which is supplied by Scotts" Rods out of Brisvegas. The guy's name is Scott Green and I have ordered a few 4X4 ehausts from him. Very helpful and very reasonable price for a self fit system. Build quality is good and he mandrel bends...