Search results

Thanks Tony, i notice you also have a snorkel do you have the same issue?

Thanks for all the suggestions guys, though soon as i posted i went out looking again and had trouble getting through the existing holes in the fire wall. So i ended up coming out the chassis near the B pillar and across to the middle poked it through a 5mm hole i drilled near where the hand...

G'Day all, I am in the middle of installing a reverse camera to my nav, i've so far run the cable from the rear of the car through the chassis and its now sitting under the drivers foot well. Now i need some help on how to get the cable into the car without driiling a new hole, any suggestions...

Hi All, I have recently installed a factory nissan snorkel to my manual D40 navara and now am getting a vibration sound through the snorkel at about 1800rpm. At first i thought it could be the wire grid at the top of the snorkel which is held in place by 2 rivets but have since siliconed it...

Hi mad D40 i've noticed that when tghe GPS says i'm doing a 100km/h the speedo says about 95, i had a look on one of the tyre size calc sites and it shows 265/75 will indeed correct the speedo.

Thanks guys i think they were the answers i was hoping to hear. Lower diff ratios is a top idea 4.8GU

hey bright spark, just wondering if your BF's are the 70 or 75 profile. The 70 proflie has a OD of 778mm and the 75 an OD of 808mm, at the moment the my stockies OD are 763mm was wondering if the jump in 45mm tyre size would have an effect.

Hey all, I'm soon to replace the original tyres on my D40. I was looking at going up to a 265/75R16 and was curious to know if anyone running this size notices a more sluggish performance with bigger tyres. particulaly cause mine is a manual which carries around 500-600kg daily and the first...

Just been out making the adjustment, hopefully its right, i'll wait for a rainy day to find if its correct or if it even makes a difference. Thanks for the tips

Yeah i checked out the sticker, i'm a bit confused by it. Will have another look see if it will make sense, thanks.

can anyone tell me how to adjust the rear brake proportiong valve for rear brake biast. I have a dual cab D40 with an alloy tray and lots of weight. I've been told the valve works as the rear sags but i've had the rear suspension done and there is no sagging so i'm assuming the prportioning...

Hey Maho, i experienced the same when i put an aluminium tray and full height and length tool boxes on my D40, took it to pedders where they added 3 extra leaves per side, that was 12 months ago and they're starting to sag again. i think i'll look at air bags next.

I three am an electrician and carry about 600 kgs day to day. I looked around at all the options, and in the end took the cheaper way out and went to pedders and got three leaves added in each side and new shocks for $1350, which lifted the rear an inch above standard, front was left stock...

Hi all, I'm new to the forum, and will shortly be receiving my new D40 dual cab ST. It will be fitted with a Obrien 6'6" alloy tray, and will be mainly used as a work vehicle carrying about half a ton of constant weight (including tray). it will also be used to take the family on a hand full of...