Does anyone have the data on how much turbo pressure the Navara 2.5 has? I have one and it is giving me p0234, when I look at the intake pressure it shows me 40 psi at Max rpm
Hi here have a intake press parameter, and show More thank 40 psi, i see the turbo and is new.When I have Torque running the boost usually peaks around 18 psi to 19 psi. Occasionally it will get to about 21 psi.
You are right, my app (thinkdiag) was not giving me the boost value, only the intake value, I will try to install Torque and see if I can use it with my OBD2. On the other hand, I bought the truck recently, and I found a spare part inside that was a turbo pressure regulator, I imagine that the previous owner already knew about this problem, I replaced the part and it lowered the pressure to 20 psi (subtracting the barometric pressure).I think you guys are talking about different things.
I think @cocodrilo is quoting intake manifold pressure while @Scott52 is quoting turbo boost.
I have read elsewhere that the former includes atmospheric pressure. That is, intake manifold pressure = atmospheric pressure + boost pressure
If that is correct (feel free to jump in if I am wrong) and atmospheric pressure is 14.7psi, then your boost is maxing at circa 25psi.
Most would say that is very high. The ECU normally throws you into limp mode for over-boosting around the 21-22 psi mark. If it doesn't then perhaps yours has had a remap? Just guessing.
I reckon most folk here enjoy max boost between 18-20 psi. I've hit 21 psi (that I know of) just once.
Happy to be corrected on any of the above.
Enter your email address to join: