Recent content by MANNING

If anything goes wrong, to buy engine parts, you may need to pay a premium.

My first thought when I heard "rumbling airy noise" was that you've had an intercooler hose either pop loose or you have a split in it. Could be the intercooler hotside that runs from the right side of block to the intercooler up front. Could maybe be the air hose from the air filter, or...

Gday Heath, welcome to the forum! If you havent started the swap over, you should consider a build write up. Or just throw up some pics showing the two you have Onya mate

Depends which state your in as to how illegal the spacers are :ROFLMAO: If you need to take the car over the pits every year in nsw vs if you live Central Western Qld and never see another car. Personally, id prefer to get the right wheel

Hey @Zephyr - welcome to the forum. Sorry that you joining is on bad terms. Hopefully the information you seek and the road to repair is here and in front of you. How far north are you?

Throw up a photo of your engine bay. Im strongly going to suggest its the 140kw

I agree - if it's in the budget, would hurt to do, maybe use that as a bargaining chip. Ask for a thousand or fifteen hundred off to go halves in the mod to ensure its a solid purchase. If the cars clean and is what you are after- why not

Lots of original bits and pieces. Original clutch and driveline, egr, injectors, chain, radiator. Had them all checked recently and the mechanic believed them to be sound. Preventative maintaince due on some things and when there's some spare cash I'll look at a couple of the bigger ones - 10...

What was it that you did to fix the egr?

Hit a milestone yesterday afternoon. Thought it would be worthy of a share.

WELCOME TO THE FORUM

WELCOME TO THE FORUM

Check post #38 I changed the number to include the international number +61403682248

BEST TO TRY MAKING CONTACT VIA THE NUMBER PROVIDED FIRST - THINK YOU'LL GET YOUR ANSWERS QUICKER

Which boost solenoid did you replace? There's the one on top and another at the intercooler. Check your cabling connections are clean and intact Have you replaced the small black rubber tubing between all the components? Make sure they are not brittle if you haven't or not twisted or kinked if...