which scantool

[2greedy]

Hi guy's

which scantool do i need? for 2005 D22 ZD30 navara? are they consultII,OBD,OBDII or what are they? from what i have read the consult setup should have a grey plug? but mine has a white plug.

So what do i need guy's definitively!

 

[gazza414]

From 1996 the std is OBD2..the plug is the same no matter the colour,,,even my Triumph motorbikes have the same plug

 

[stockstandard]

Have a search around the forum to make sure, but I'm pretty sure the 2005 d22 uses consult II

 

[2greedy]

Have a search around the forum to make sure, but I'm pretty sure the 2005 d22 uses consult II

thx guy's really appreciate the help, so basically i need and OBDII reader that does consultII ? now this consult II is it consult II or ConZult II?

 

[KraftyPg]

Consult is the Nissan software, while it's available on some questionable sites on the net it's not a readily available system to buy I also believe Consult II is an old version.

Also it may be worth rechecking the OBDII adaptability, I'm fairly sure that while the earlier D22's have a OBDII port it is not fully compatible with all OBDII port readers, because there is no legal requirement to adhere to a particular protocol, just provide a port.

While OBDII has been around since the mid 90's not all OBDII ports are the same. I believe Dave found out his 06 while OBDII compliant will not accept a scangauge, while scangauge is not the only OBDII tool the fact that later models do accept the scangauge would indicate different protocols at work.

 

[stockstandard]

Do a Google search for ecutalk. The guy makes gauges that work for consult connectors....just to throw another spanner in the works. I have actually read there are certain Nissan vehicles that look like they use an OBD 2 plug but actually only support the consult software.

 

[glc]

The 05 d22 has an obd connector, but runs consult 2 not obd. Ecu talk is the only one I found that was available. Pretty limited in information that is available using this device though, not like a scanguage.

 

[vicszd30]

'03 zd30 scan tool ?

Hello fellow nav' owners ! And what about the '03 zd 30 nav ? What scan tool would I need to buy ? I have looked and looked "here and google" but are having no luck .. thanks vic

 

[Rumpig]

Ecutalk for the ZD30.

 

[vicszd30]

ahhhhh brilliant ! cheers Rumpig...

 

[Bushpig]

I have a adapter 14 pin Nissan plug to a 16 pin plug for my 2001 nissan d22 diesel what scanner would work

 

[Scott52]

Have a look at the Autel MaxiAP200. It reads codes in all modules plus I can confirm it will code keys, injectors and recode ECU's to suit the keys, BCM and immobiliser. They're about $130 on eBay and other online sites and give close to Dealer level capability.

https://autel.net.au/specialty-products/maxiap-ap200/
If you think this is for you make sure it's the AP200 not the cheaper reduced features AP200H, AP200C or AP200M

 

[Bushpig]

Have a look at the Autel MaxiAP200. It reads codes in all modules plus I can confirm it will code keys, injectors and recode ECU's to suit the keys, BCM and immobiliser. They're about $130 on eBay and other online sites and give close to Dealer level capability.

https://autel.net.au/specialty-products/maxiap-ap200/
If you think this is for you make sure it's the AP200 not the cheaper reduced features AP200H, AP200C or AP200M

Don't think it has a ECU,it's a Japanese import in new Zealand , just one driver side airbag in steering wheel that's it and the light is flashing