Nissan Steel Bullbar

[redoutback]

Hi, I am new to this forum.
Last week I purchased a Pathfinder 08 TD (same as D40 ST- X) and trying to fit a bullbar.
I had a Nissan Bullbar(Part no F2210-JR000AU) compatible with Navara ST (not ST-X) from a guy working at a smash repair.

Would this fit on the Pathfinder? I heard that Pathy and Navara D40 are the same.

Cheers,

Ed

 

[KraftyPg]

Welcome to the forums

Pathy's and ST-X's are generally the same to the B-Pillar, there are differences down the model range from the ST-X to the RX (ST being in the middle). The main difference is the country of build and the ST's I'm fairly sure were all Thai built so there is a chance that the bullbar wont fit ST's but will fit ST-X's

Either way someone else might come along later with a more definite answer.

 

[Old.Tony]

Welcome to the forum!

The ST has different mounting for bullbars. Someone's already tried doing it the other way - fitting an STX bar onto an ST - not going to happen, apparently.

ST's are Thai builds, not Spanish like the STX Dual Cabs (Spain = VIN starting with 'VSK').

I'll go have a look at my bar later and see what its model number is.

 

[redoutback]

Hi Tony, Thanks for your reply.

It seems that the bullbar I have won't fit on my Pathy.
Do you remember the one who tried to fit STX bar onto ST?
If he still keeps the bullbar, we can swap the bars....

I used to have Lancruiser V8 petrol and it was drinking too much so changed to Pathy TD.
I wonder how is the off road ability of the Pathy.

Cheers,

Ed

 

[KraftyPg]

I probably would have looked into the idea of the Pathy off road before I brought it if my plan was to take it off road but each to their own.

I was reading a review of the new Pathy the other day and although it's a different beast they reckon the new one is a decent off road limo. But it's still got a lot to do with what you want to do with it that makes it a good or bad off roader, it's unlikely to win 2011 Tuff Trucks competitions but that doesn't mean it wont go alot of places anyone here has taken their ute.

 

[Old.Tony]

Hi Tony, Thanks for your reply.

It seems that the bullbar I have won't fit on my Pathy.
Do you remember the one who tried to fit STX bar onto ST?
If he still keeps the bullbar, we can swap the bars....

I used to have Lancruiser V8 petrol and it was drinking too much so changed to Pathy TD.
I wonder how is the off road ability of the Pathy.

Cheers,

Ed

My part number is F2210-EC000AU so it's definitely different to yours.

I should have been more clear - the person had bought an ST and were trying to see if an STX bar would fit on it, I don't think they'd bought the bar.

Off-road the Pathy probably isn't a whole lot different to the D40. The new ones have better ground clearance, they have plenty of power and if you get your hair wet, there are built-in hair dryers under the two front seats.

 

[Jason]

Welcome to the forum.

 

[rayman251981]

Will a nissan bull bar F2210-EC000AU fit my 2010 D40 / Thai built navara

 

[Old.Tony]

Will a nissan bull bar F2210-EC000AU fit my 2010 D40 / Thai built navara

There were minor differences up front between the Thai and Spanish (that the F2210-EC000AU bar was designed for) builds. The bar you want should be a F2210JR100AU or F2210JR000AU.

 

[rayman251981]

Hi there, I appreciate the reply to my post. The problem I have is, I need to know if I can fir the one I have. Are there any known mounting kits available etc

 

[Old.Tony]

Ok, so assuming you have a Thai built truck and a bullbar designed for a Spanish truck ... I haven't heard of a mounting kit that allows this.

That doesn't stop you measuring it and seeing it it's likely to work.

 

[Scott52]

There's a fellow here in Perth who does nothing but used bullbars and brackets. I bought my genuine Nissan bullbar for my Thai 2011 D40 from Zak. It cost me $500 including the brackets for the Thai. He'll ship items to the east coast to.

He was helpful and was a walking encyclopedia about 4wd bullbars and what fits what.

He advertises on Gumtree and his name is Zak ... strangely enough he calls himself "Zak's Bullbars". Maybe give him a call as he can advise and might be able to send you brackets.

https://www.gumtree.com.au/s-seller/Zak/1010897852/date/1
He has a yard and a shed that are stacked with bullbars ... he must have hundreds there.